Monarch Industrial Products India Private Limited

Paste grade system for repairing and rebuilding machinery and equipment.Based on a silicon steel alloy blended with high-molecular weight reactive polymers and oligomers. When cured, the material is durable yet fully machinable. Also used as a high-strength structural adhesive for bonding or for creation of irregular load bearing shims with good electrical insulation characteristics. For use in Original Equipment Manufacture or repair situations.

Additional Information:

• Item Code: CWC1111
• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

Paste grade system with extended working life for repairing and rebuilding machinery and equipment. Based on a silicon steel alloy blended with high molecular weight reactive polymers and oligomers. Also used as a high strength structural adhesive for bonding or for creation of irregular load bearing shims with good electrical insulation characteristics. Once cured, the repair is durable and fully machinable. For use in Original Equipment Manufacture or repair situations.

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

Paste grade system designed for rebuilding metals damaged by erosion-corrosion. Based on a silicon-steel alloy and ceramic particles blended within high molecular weight reactive polymers and oligomers. Specifically designed to be used with Monarch erosion-corrosion resistant coatings. Also used as a high strength structural adhesive for bonding or for creation of irregular load bearing shims with good electrical insulation characteristics. For use in Original Equipment Manufacture or repair situations

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

System for repairing and protecting surfaces against abrasive attack The product is based on high molecular-weight polymers and oligomers incorporating abrasion resistant ceramic aggregates. This material may be applied from 1/8 in. (3 mm) to unlimited thickness onto horizontal or vertical surfaces.

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

System is a Rapid-curing elastomeric material Ideal for emergency and permanent repairs. Packaged in sealed, foil laminated sachets. When mixed the material cures rapidly to form a tough but flexible elastomeric repair.

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

Metal-filled epoxy for repairing, rebuilding, and maintaining bronze parts and equipment,  maintain marine propellers, shafts, trays, chutes, gate valves, and pump wear rings

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

 

Epoxy coating designed to provide corrosion resistance to high temperature equipment operating under continuous immersion up to 110°C (230°F). This solvent-free coating provides excellent resistance to a wide range of aqueous solutions, hydrocarbons and process chemicals. It is easy to mix and apply

 

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex Stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

A heavy duty, high temperature water repelling compound that protects against seizure of metal parts. It is suitable for easy assembly and dismantling without seizure or distortion of new and overhauled equipment / machinery and all facets of engineering as found in steel and mining industries

HEAT RESISTANCE
Glass Transition Temperature (Tg) When tested to ISO 11357-2, Tg of samples cured under the conditions stated below will typically be: 145.6 °F (63.1 °C) 72 °F (22 °C) for 7 days 199.0 °F (92.7 °C) post cured 212 °F (100 °C) for 1 day Wet (Slurry) Service Temperature For many typical wet (slurry) service applications, the product is suitable from -40 °F (-40 °C) to 176 °F (80 °C). Dry Service Temperature For many typical dry service applications, the product is suitable for operating temperatures from -40 °F (-40 °C) up to 212 °F (100 °C). Dry Heat Resistance The indicated degradation temperature in air based on Differential Scanning Calorimetry (DSC) operated in accordance with ISO 11357 is typically 392 °F (232 °C)

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: 7 days
• Packaging Details: 1Kg, 5Kgs & 10 Kgs

Aluminum-filled epoxy putty for dependable nonrusting repairs to aluminum castings, machinery, and equipment widely used in HVAC applications 

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

A heavy duty, high temperature water repelling compound that protects against seizure of metal parts. It is suitable for easy assembly and dismantling without seizure or distortion of new and overhauled equipment / machinery and all facets of engineering as found in steel and mining industries

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

A 2-part composite material for metal repair and resurfacing based on a solvent-free, surface-tolerant epoxy resin reinforced with silicon steel alloy. This composite material is specifically designed for application to wet and oil contaminated surfaces, as well as for underwater applications. It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools.

Key benefits:

• Bonds strongly to wet, oily and manually prepared surfaces
• Multi-purpose durable repair composite
• Application and cure at room temperature and underwater - no hot work involved
• Excellent bonding to metals including stainless steel, carbon steel, aluminium, brass, copper and other rigid surfaces
• Fully machinable using conventional tools
• Excellent electrical insulation characteristics
• Reduced health and safety risks as it is solvent-free
• No shrinkage, expansion or distortion
• Outstanding corrosion protection
  
  Applications:
• Repair of oil and water leaks
• Sealing of joints and flanges
• Repair of cracks and holes on engine and pump casings, transformers, pipes, tanks and other equipment
• Resurface of pitted metal surfaces
• High strength structural adhesive for metal bonding
• Creation of irregular load bearing shims and reforming of bearing housings
• Excellent chemical resistance against a wide range of chemicals
  
  
  

Additional Information:

• Production Capacity: 100T
• Delivery Time: 7 days
• Packaging Details: 1 Kg, 5Kg & 10Kgs

A stainless steel-filled epoxy for rebuilding and repairing stainless steel equipment. Patches, repairs and rebuilds stainless steel equipment in areas where welding is not practical or impossible

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

Epoxy base fast-curing repair material is ideal for emergency repair situations. It can be machined using conventional tools and provides a permanent metal bonding or rebuilding solution.

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

System is a  metal repair composite based on a silicon alloy blended with a heat-activated epoxy resin. Designed to repair and protect metal surfaces suffering from Corrosion under Insulation 

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex Stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

This high temperature repair system is designed for metal repair and rebuilding equipment and provides excellent corrosion protection.

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

Injection grouting is a process that uses a material to fill gaps, cracks, and other openings in concrete or masonry structures to strengthen them and stop water from moving through. The material is injected under pressure and cures in place

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex Stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

Epoxy coating which provides outstanding chemical resistance and protects equipment operating under immersion in aqueous solutions up to 50°C (122°F) from the effects of corrosion. This solvent-free material can be easily applied by brush or spray to virtually any metallic and non-metallic surface, simplifying maintenance works.

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

High-performance coating, specifically formulated for protecting the leading edge of wind turbine blades from erosion and impact damage.

This system is ideally suited for the rigorours of in-situ applications, being easy to apply by brush in a single coat. Together with its low-temperature cure technology, XTRALIFE CB can maximise available maintenance opportunities and ensure the turbine’s fast return to service.

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex Stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

Epoxy-based composite material combining extremely hard closely packed abrasion resistant ceramic aggregates in a polymeric binder for the repair and protection of equipment damaged by fine particle abrasion.

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

A solvent-free epoxy coating, which cures in contact with hot surfaces and is designed to prevent or protect metal from corrosion under insulation (CUI). XTRALIFE HA (HA-Barrier) can be easily applied by brush and does not require any weighing or mixing.

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex Stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

A 2-part spray-applied epoxy coating designed to provide corrosion resistance to high temperature equipment operating under continuous immersion up to 110°C (230°F). This solvent-free coating provides excellent resistance to a wide range of aqueous solutions, hydrocarbons and process chemicals. It is easy to mix and apply using heated airless spray equipment and it cures at room temperature reducing downtime.

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex Stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

Solvent-free and UV-stable floor coating. It is designed to offer long–term protection and durability for internal and external flooring applications. This system provides outstanding mechanical strength  and resistance to abrasion, ideal for areas with high levels of vehicular and pedestrian traffic.

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex Stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

Epoxy barrier coating optimised for resistance to hot inorganic acids such as sulphuric and hydrochloric acid up to 90°C (194°F). This solvent-free coating isolates concrete and metal surfaces from deteriorating chemical environments.

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex Stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

System is a Fluid consistency material based on blends of low, medium, and high molecular weight reactive polymers. Once combined, the base and solidifier form a tough, but highly flexible, elastomeric repair compound.

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

System is s Copolymer resin coated fiberglass yarn, weaved by rapier weaving machine. It is excellent alkaline resistance, high strength and excellent bonding to coating

Additional Information:

• Item Code: 3214
• Production Capacity: 100 Tons
• Delivery Time: Ex Stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

This System is used to repair and patching compound, Which is ready-to-use, right from the can. Once heat cured, it withstands temperatures as high as 1000ºF.

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

The moisture surface tolerant epoxy putty makes effective repairs to metal, concrete, wood surfaces in wet and dampenvironments. The product is used extensively for chronically underwater repairs, underwater patching, filling cracks, leaks,holes and the applications where dampness is present such as boat hulls, tanks, pipelines, valves, pumps, concrete vessels etc. The putty is unaffected by chlorinated or salt water and is ideal for plumbing, irrigation and marine where applications are underwater

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex Stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

This  coating designed for the protection of metallic and masonry surfaces against physical, chemical and bacterial attack. This durable material is ideal where toughness, environmental, erosion and corrosion resistance are required, yet providing a highly decorative non-toxic surface which is easy to clean by commonly used cleaning agents.

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

A durable, two-parts repair composite for long-term metal and concrete protection from a broad range of chemicals, especially concentrated inorganic acid and alkalis (e.g. nitric acid, sulfuric acid, sodium hydroxide).

Additional Information:

• Production Capacity: 100 Tons
• Delivery Time: Ex Stock
• Packaging Details: 1Kgs, 5Kgs, 10 Kgs

Zero- Down - Time (A ) First Aid Kits containing 10 Preferred Selection of Products - for Maintenance & Repair of Mechanical Maintenance

Additional Information:

• Item Code: ZDT01
• Production Capacity: 1000 Kits
• Delivery Time: Ex Stock
• Packaging Details: 10Kits, 100 Kits

Zero- Down - Time (B) First Aid Kits containing 20 Preferred Selection of Products - for Maintenance & Repair of Mechanical Maintenance

Additional Information:

• Item Code: ZDT02
• Production Capacity: 1000 Kit
• Delivery Time: Ex Stock
• Packaging Details: 10 Kit, 100 Kit

Zero- Down - Time (A ) First Aid Kits containing 10 Preferred Selection of Products - for Maintenance & Repair of Electrical Maintenance

Additional Information:

• Item Code: ZDT03
• Production Capacity: 1000 Kits
• Delivery Time: Ex Stock
• Packaging Details: 10 Kit, 100 Kit

Zero- Down - Time (B ) First Aid Kits containing 20 Preferred Selection of Products - for Maintenance & Repair of Electrical Maintenance

Additional Information:

• Item Code: ZDT04
• Production Capacity: 1000 Kits
• Delivery Time: Ex Stock
• Packaging Details: 10Kit , 100 Kit

Zero- Down - Time (A ) First Aid Kits containing 10 Preferred Selection of Products - for Maintenance & Repair o Electronics & Instrumentationl Maintenance

Additional Information:

• Item Code: ZDT07
• Production Capacity: 1000 Kit
• Delivery Time: Ex Stock
• Packaging Details: 10kit, 100 kit

Zero- Down - Time (A ) First Aid Kits containing 10 Preferred Selection of Products - for Maintenance & Repair of Fire & Safety

Additional Information:

• Item Code: ZDT09
• Production Capacity: 1000 Kit
• Delivery Time: Ex Stock
• Packaging Details: 10 kit 100 kit

Zero- Down - Time (B ) First Aid Kits containing 20 Preferred Selection of Products - for Maintenance & Repair of Marine Industry

Additional Information:

• Item Code: ZDT12
• Production Capacity: 1000 kits
• Delivery Time: Ex stock
• Packaging Details: 10kit 100 kit

Zero- Down - Time (A ) First Aid Kits containing 10 Preferred Selection of Products - for Maintenance & Repair of Metals & Mining Industry

Additional Information:

• Item Code: ZDT13
• Production Capacity: 1000 kit
• Delivery Time: Ex Stock
• Packaging Details: 10 kit , 100 kit

Zero- Down - Time (A ) First Aid Kits containing 10 Preferred Selection of Products - for Maintenance & Repair of Steel Industry

Additional Information:

• Item Code: ZDT15
• Production Capacity: 1000 Kiits
• Delivery Time: Ex Stock
• Packaging Details: 10 Kit 100 kit

Zero- Down - Time (B ) First Aid Kits containing 20 Preferred Selection of Products - for Maintenance & Repair of Automobiles Industry

Additional Information:

• Item Code: ZDT18
• Production Capacity: 1000 kits
• Delivery Time: Ex Stock
• Packaging Details: 10kit, 100 kit

Zero- Down - Time (A ) First Aid Kits containing 10 Preferred Selection of Products - for Maintenance & Repair of Automobiles Industry

Additional Information:

• Item Code: ZDT17
• Production Capacity: 1000 Kit
• Delivery Time: Ex Stock
• Packaging Details: 10kit 100 kit